Directions – To condition, clean, remove protein and disinfect lenses, complete these simple steps. This daily regimen is recommended bu Baush + Lomb for a healthy and comfortable contact lens wearing lens wearing experience:
1. Place at least 3 drops of Biotrue multi-purpose solution on each side of lens surface and gently rub for 20 seconds.
2. Thoroughly rinse each side of the lens for 5 seconds with Biotrue multi-purpose solution.
3. Place cleaned contact lenses in the lens case and fill with fresh Biotrue multi-purpose solution. Soak at least 4 hours. Remember to always use fresh solution – discard solution from lens case after each use.
Your lenses are now ready to wear. If any debris remains on contact lenses, rinse with Biotrue multi-purpose solution prior to insertion.
Always follow your eye care professional’s instructions. Based upon your individual tear chemistry and lens-wearing schedule, your eye care professional may recommended additional products or procedures.
Storage: If not wearing contact lenses immediately, store them in a closed lens case. Do not store your lenses in simple saline in place of Biotrue multi-purpose solution. Saline solution will not disinfect. Lenses may be stored in the unopened case until ready to wear, up to a maximum of 30 days. If your store your lenses for longer periods of time, they must be cleaned and disinfected with fresh Biotrue multi-purpose solution prior to lens insertion.